Página de inicio | Vacuum Recovery System| KL-VR-110 Abrasive Vacuum Recovery System

Página de inicio > Vacuum Recovery System

KL-VR-110 Abrasive Vacuum Recovery System

Place Of Origin: China
Working Type: Vacuum Suction
Usage: Recovery Blasting Abrasives
Application: Blasting Painting
Descripción del producto：KL-VR-110 Abrasive Vacuum Recovery System from Kholee Blast includes vacuum recovery machine, abrasive collection tank, grits hose. It is used to recovery blasting abrasives after blasting from ship b
Investigación

KL-VR-110 Abrasive Vacuum Recovery System is designed to recover spent recyclable abrasives from a blasting area into a silo for subsequent return to the blast cleaning equipment or, in the case of expendable abrasives, for disposal into a waste hopper. After depositing the abrasive into the silo, the vacuum flow containing air and dust continues on to the suction unit, where the dust particles in this stream are removed by high performance filter cartridges prior to exhausting air to atmosphere.

Application

To recovery Steel Shots, grits and garnet after blasting and widely used in the industry of shipbuilding, ship repair, marine offshore, big tank internal blasting etc.

Model	KL-VR-110 Abrasive Vacuum Recovery Machine
Electrical Motor	110kw Star Delta
Air Flow	72m3/min @-450mmHg
Max Vacuum Degree	-0.0667Mpa Over vacuum protection by vacuum relief valve
Vacuum Pump	KFM Korea \| ANLET Japan
Dust Collector	PLC control Pulse Jet Clean Type Dust Collector Periodical Air Reverse Jet
Compressed air	0.6~0.8Mpa, 1.0m3/min
Dust Emission Density	≤15mg/m3
Electrical Control	PLC Auto Control, IP54 Protection 380V/415V/440V, 50Hz/60Hz, 3Ph
Noise Level	≤85dB(A) @ Radius 5m
Equipment Size	3.2×2.3×2.6mtr
Shots silo Capacity	10 tons. Φ1700×3150mm
Abrasive Recovery Capacity	8~12 t/hr upto 50m vertical suction 20m horizontal Machine to silo
Supply Scope of Equipment	- Vacuum Recovery Machine, 1 unit - Abrasive Collection Tank,1 unit - Vacuum Hose 6” - Grit Hose 5” - Dust Hose, 2”